Stainless Steel Commercial Hydraulic Rake Machine Ramen Machine Panel Machine Electric Press Machine Cold Machine 220v 2200w 1pc
Product parameters
Voltage: 220v
Power: 2.5kw
Yield: 2 bowls / 9 seconds
Weight: about 63kg
Size: 600 * 200 * 600mm
NOTE:The machine with 4 molds.
Features:
1. The device does not need to be installed, and it can be used on the pan;
2. The machine can rotate 360 °, and the ground wheel can be pushed at will;
3. Simple operation, quick pressing and convenient;
4. Light equipment, one person can disassemble and install;
Working principle: The machine is composed of electric motor, gear oil pump, hydraulic cylinder, manual valve, dough tube, hopper and other parts. During work, the food material is filled into the dough tube. The motor drives the hydraulic cylinder to press down, pushing the dough through the mold, and squeezed by the mold Compression molding.
Precautions:
1. Single-phase motors can generate static electricity during movement. the machine should be ground line before using it;
2. Before each start-up, check that the screws in all parts should be tightened, and no loosening is allowed;
3. 6-7L hydraulic oil should be added before use. Do not start the machine before refueling.
4. No damage to the electrical components of the power supply, cables, plugs, leakage, oil drop, etc., and it is forbidden to start the machine without checking;
5. The processed flour or squeezed noodles should be mixed evenly according to the requirements of the filling ratio. It is not allowed to fill the dough with dry and hard noodles, so as to prevent the hole from overloading the machine, causing damage to machine parts or burning the motor.
Picture showing
Reviews
There are no reviews yet.